Showing posts with label bridge. Show all posts
Showing posts with label bridge. Show all posts

Saturday, April 23, 2011

Top Five ways to improve your tone

In honor of the movie (and book) High Fidelity here are the top five ways to make your electric guitar or bass sound better.

5.  electronics- 
this Stratocaster pickguard has copper shielding tape, 250k CTS pots, .022 uf orange drop capacitor, 5-way switch, cloth-covered wire, and Schuyler Dean pickups

This includes pots, capacitors, switches, jacks and shielding.  If you're building a guitar it is a good idea to not skimp on this part and if your doing something like installing new pickups it's nice to use quality electronics to carry the current.
  • Shielding- it is important to have shielding grounded properly and surrounding the entire control cavity so that outside electrical interference can't get in.  typically luthiers use shielding paint on the wooden cavity grounded by a lead wire, and shielding tape on the back of the pickguard.  Everything is grounded in this circuit; the pots touching the pickguard shielding, the metal covers on humbuckers, and even the braiding on 2-conductor wire.  A wire is then run from the back of the pots to the bridge grounding the strings.  Ever notice how when you touch the strings the amp stops humming?
  • Potentiometers (pots)- 250K pots are warmer and typically used for single coils and 500K pots are brighter and typically used for humbuckers.  No-load pots are louder and make the guitar sound brighter.  There are endless possibilities.
  • Capacitors (caps)- The higher the number, the more bass at the zero setting on your tone control.  A .100 uf cap will sound warmer than a .001 uf cap.  Again the possibilities are endless.
4.  The Nut-
 a bone nut in a Fender P-Bass

This piece of shaped plastic or bone holds the strings in place at the zero fret for the correct string spacing.  Most are made of inexpensive plastic but you can get a nicer tone from bone or even brass for killer sustain!  You can only hear the difference when the strings are being played open of course.


3.  The Bridge-
the Stratocaster tremolo pivots on six body screws and is tensioned by three 
to five springs mounted on the bottom of the body.

There are many different types from the tremolo to the string-thru-body and they all add a bit of character to your guitar.  Brass saddles will typically sound a little nicer than cheaper steel ones.

2.  Pickups- 
Jazzmaster pickups get their fat tone from short "pancake" style 
bobbins and plenty of winds of copper wire.

All pickups really do is change string vibration into an electrical current, but they have everything to do with your guitar tone and how it behaves through the amp.  Good quality pickups like the ones I make will sound clearer and have more voice and character than cheap ones.  High-output pickups will be louder and produce more lows than brighter low-output pickups.

1.  Strings-

And the number one best way to improve your tone (aside from practicing) is to use new, high-quality strings.  Strings with more nickel will sound warmer, and strings with more steel will sound brighter.  You can also opt for flatwounds for an even warmer tone.  Larger diameter strings like .011's (on six string guitar) will be louder and warmer because there is more mass moving for the magnetic pickup to detect.  Old, dirty strings will not perform as well and sound dead so it is important to keep your strings clean and change them regularly.

Tuesday, August 10, 2010

The hum-canceling Telecaster bridge pickup

single coil sound with the ability to "buck" hum!

Anyone who plays a Tele knows that they are vulnerable to interference and thus create a lot of hum through the amp.  Single coils naturally create a 60 cycle hum and there is no way around that.  Some companies offer solutions like samamium cobalt noiseless pickups, or stacked humbuckers, but usually at the cost of tone.  Some guitars with two pickups can be wired out of phase to cancel hum between the two pickups, but on a Telecaster even the middle position on the pickup selector offers no hum-canceling effect.  That's because both coils are wound counter-clockwise and the poles are charged North-up, partly because hum-canceling technology was non-existent in the 50's and partly because that middle position tone has become such a trademark of the Tele tone.

One of the best ways to combat hum and still keep the single coil tone is to have a split-single coil wired out of phase, like a P-Bass pickup.  What I have created here is essentially a P-Bass pickup that looks and sounds like a Telecaster pickup.  One coil is wound counter-clockwise and is charged North up and the other is wound clockwise and is charged South up.  They are then wired out of phase to cancel hum.  All of the normal Tele characteristics like a copper-plated steel baseplate, cloth-covered leads, and vintage-style flatwork are included.  I don't want to give the impression that I was the first one to do this, but this is not something you can just walk into Guitar Center and buy.  They are wound to 7k and are available for Teles for $125 each.  Contact me here to order yours.

Thursday, November 12, 2009

Modifying the Jazzmaster Tremolo

before upgrade


after upgrade

The Jazzmaster has been a favorite guitar for lots of artists for a long time now. Sonic Youth, Dinosaur Jr., the Smiths, just to name a few, use this guitar almost exclusively. I love this guitar, it has an interesting body style, a 25.5 inch scale length (just like a Stratocaster), and a fantastic tremolo bridge. The Jaguar has a similar bridge with a shorter scale length. The only drawback that I can see is that you get a lot of noise from the bridge. Since the strings are so long from the saddles to the tail, you get a lot of vibration and ghost notes that come throught the amplifier. I've heard other Jazzmaster users complain of this issue as well. Fixing the problem is extremely easy, with a simple screwdriver you can install a "buzz stop." This mod does not negatively effect the playability or tone of the guitar, and it's 100% reversable.

This mod fixes three problems with the Jazzmaster:
1. As I mentioned before, it stops the bridge from buzzing.
2. It holds the strings tighter to the bridge so there is no chance of the strings falling off the saddles.
3. It increases the bearing pressure* of the guitar.

*bearing pressure is the downward force of the stings on the nut and the bridge. As the angle of the string over the contact points increases, so does the bearing pressure. The higher the bearing pressure, the more attack and sustain a guitar will have. Fender Telecasters have quite a bit of bearing pressure because after the strings pass over the saddles, they make a 90 degree turn down through the body, this keeps things pretty tight. Telecasters are by nature snappy guitars with lots of sustain.

The Buzz Stop is simply a bracket with a roller. To install simply remove the strings, feed them through the roller, screw down the bracket with the two screws and reinstall the strings. Done! Now play for a while and decide if this is something you like, my guess is that you will.